TMT Xiaomi RSA Pinout Finder Tool V1.0 Free Download Now

 

TMT Xiaomi RSA Pinout Finder Tool v1.0 Free Download

An RSA Test Point is a particular physical point on the motherboard of Xiaomi smartphones that is used to turn off the RSA (Root of Security Architecture) security feature. Xiaomi put this safeguard in place to stop illegal access to the device's firmware and other important system parts. These test points can be accessed by technicians and experienced users to carry out operations like firmware flashing, device unbricking, software repair, and IMEI repair.

RSA Test Point Steps for IMEI-Related Tasks

Identify the RSA Test Point

Locate the RSA Test Point on the device's motherboard.

Refer to the official schematics or use tools like Xiaomi RSA/Test Point/ISP Pinout Finder to find the correct location.

Understand the RSA Test Point Functionality

The RSA Test Point is typically connected to a resistor or similar hardware.

This resistor might need to be replaced or adjusted to manipulate RSA protection.

Evaluate the Current Resistor Value

Measure the resistor value present at the RSA Test Point using a multimeter.

Commonly encountered resistor values include:

Low (e.g., 10kΩ)

High (e.g., 100kΩ or more)

Modify the Resistor Value

Replace the current resistor with a compatible one that meets your requirement:

If a 10kΩ resistor is present, bypass or replace it with a higher-value resistor (e.g., 100kΩ or more).

Alternatively, a lower-value resistor can also be used depending on the task.

Perform IMEI-Related Tasks

Once RSA protection is bypassed, proceed with tasks like:

Flashing the firmware

Repairing or modifying the IMEI

Unbricking the device

Use Caution During Resistor Modification

Avoid short circuits or damage to other components on the motherboard.

Ensure proper soldering techniques to prevent hardware issues. 

Check Compatibility and Functionality

After modifications, verify that the RSA protection is successfully bypassed.

Ensure that the device is functioning as expected before proceeding further.

Reassemble and Test the Device

Reassemble the device carefully.

Test the device thoroughly to confirm the success of the operation.

Download Link  👇

TMT Xiaomi RSA Pinout Finder Tool V1.0

Download Link 1 Download Link 2