Android App F64 v2026.07.28 Latest Version Download Tested 100%
This morning I finally installed the first stable release of the F64 Android App because I wanted to check if I could handle small repair jobs without opening my laptop every time. Before using the app, I updated my F64 Ultra firmware from the Windows software since the older firmware is not compatible with this release. After pairing the box with my Android phone through BLE 5.0, I tested several functions like reading a UFS chip, checking the partition table, changing the boot slot, and erasing the FRP partition. The app is developed by the F64 Team and currently supports UFS storage only.
Features
- First stable Android application for the F64 Ultra.
- Connects to the box through Bluetooth Low Energy (BLE 5.0).
- Supports UFS 4.1, 4.0, 3.1, 3.0, 2.2, 2.1 and 2.0.
- Displays the complete Partition Table Explorer.
- Read, write and erase UFS partitions.
- Reads complete JEDEC information.
- Shows OTP Lock status.
- Displays Android version information from the connected UFS chip.
- Quick UFS attribute and flag settings.
- Change Android Boot Slot directly from the mobile app.
- Supports ISP and Chip-Off operations.
- Reads Android boot logs through UART RX/TX.
My Testing Experience
The first thing I checked after connecting the box was whether the app could read a UFS chip correctly. I connected a Micron UFS chip and pressed the Identify button. Within a few seconds the app displayed the complete partition table along with the OTP Lock status and Android 15 information. That confirmed the connection was working properly. Software
Next, I searched for the FRP partition using the built-in search box. Instead of scrolling through the full partition list, I simply typed FRP, selected the partition, and tested the erase function. The operation finished successfully, although it took a little over one minute because the communication happens through Bluetooth instead of USB.
I also opened the Quick Set menu to check the new Boot Slot feature. My connected device was using Boot Slot A, so I changed it to Boot Slot B. After refreshing the connection, the app showed that the active slot had successfully changed to Boot Slot B. is very helpful for daily reapir in the gsm market.
One thing I noticed during testing is that this Android app is much more suitable for quick jobs like FRP removal or changing boot slots. I would still use the Windows software whenever I need to read or write large dump files because Bluetooth transfer is much slower than a USB connection.
Before finishing my testing, I also checked for eMMC support. As mentioned by the developer, the eMMC options are still hidden in this release, so the Android app currently works only with UFS storage.
What's New (Changelog)
- Released the first stable version of the F64 Android App.
- Added support for UFS 4.1, 4.0, 3.1, 3.0, 2.2, 2.1 and 2.0.
- Added full Partition Table Explorer.
- Added Read, Write and Erase partition functions.
- Added full JEDEC information reading.
- Added Quick Set menu for UFS attributes and Boot Slot changes.
- Added Android Boot Slot switching.
- Added ISP and Chip-Off support.
- Added UART Android boot log reading.
- Updated EROFS File Manager with file delete, inject and compressed file extraction.
- Updated EXT4 File Manager with improved file injection support.
- Added F2FS File Manager support.
- Added FAT12, FAT16 and FAT32 File Manager support.
- Added VBMETA flag settings inside Dev Tools.
- Added MBR and EBR partition listing support.
- Added Android 17 AVB 1.4.0 support.
- Added new UART and ISP pinout files.
- Fixed BackupGPT boot slot switching issue.
- Fixed UART logging buffer overflow.
- Fixed WriteBooster generation on newer Snapdragon devices.
- Requires SoC Firmware 07.25.2026 or newer.
- Requires ASIC Firmware 07.23.2026 or newer.
- eMMC is not supported in this release.
How to Install
- Download the latest F64 software package.
- If the download does not start in your current browser, try downloading it using Google Chrome.
- Install the Windows software on your computer.
- Open Hardware Settings and click Write Box Firmware to update your F64 Ultra.
- If the firmware download fails, scan the QR code shown inside the software to download the firmware manually.
- After the firmware update is complete, disconnect the box from the PC.
- Power the F64 Ultra using a normal Type-C charger.
- Install and open the F64 Android App on your phone.
- Enable Bluetooth and search for the F64 Ultra.
- Enter the default Bluetooth pairing PIN shown inside the Windows software.
- Wait until the connection is completed.
- The Android app is now ready to use.
Important Note for Android Users
One small thing confused me the first time I downloaded the app. The file comes as a ZIP archive, not as a ready-to-install APK. I had to extract it first before I could install anything. I used the UnRAR app from the Google Play Store, and after extracting the ZIP file, the APK appeared and installed normally. If you try to install the ZIP file directly, Android will simply refuse the installation.

0 Comments