Xiaomi DIAG Mode Tool v2.1 Download Latest Version Tested 100%

Xiaomi DIAG Mode Tool v2.1 Download Latest Version Tested 100%

Xiaomi DIAG Tool v2.1 is a small Windows utility made for enabling DIAG mode on supported Xiaomi phones. I checked the supplied build and found that it first looks for a connected Xiaomi device, then prepares the required diagnostic package and starts DIAG mode. It also checks for the DIAG driver after the process. The tool is developed by GSMYOGESH.

Features Xiaomi DIAG Mode Enable Tool

• Automatic Xiaomi Device Detection: The tool keeps checking for a connected Xiaomi phone and shows the detected model and Android version when the device is available. 
• ADB Connection Check: The phone needs to be connected with ADB enabled before the main DIAG process can start.
• Device Information: The tool can read the Xiaomi model, brand, Android version and available MIUI or HyperOS information from the connected device. 
• Automatic DIAG APK Handling: If the required diagnostic package is not already installed, the tool tries to install it automatically. 
• Manual APK Installation: If automatic installation does not work, the tool copies the required package to the phone and asks the user to install it manually from the Download folder. 
• DIAG Mode Start: After the required package is ready, the tool starts the diagnostic mode on the Xiaomi phone. 
• DIAG Driver Detection: After starting DIAG mode, the tool waits for the Windows DIAG driver and shows the detected driver when available.
• Progress Status: The main window shows stages such as Checking, Installing, Starting DIAG, Detecting and Success while the process is running.
• Manual Installation Verification: When the APK has to be installed manually, the tool can check again whether the package is installed before continuing with DIAG mode.
• Dark Interface: The tool uses a dark interface with a simple device status area, progress bar and main action button.

What's New

• Current release version is v2.1. 
• Automatic device monitoring is included in the main window.
• The tool can show the connected Xiaomi model and Android version.
• Automatic installation of the required Xiaomi diagnostic package is supported.
• A manual installation fallback is available when automatic installation fails.
• The tool checks for the DIAG driver after starting diagnostic mode.
• A separate verification step is available after manual APK installation.

How to Install Xiaomi DIAG Tool

1. Download Xiaomi DIAG Tool v2.1 from the download section below.
2. Extract the downloaded package if it comes as a ZIP archive.
3. Keep the required Xiaomi diagnostic APK in the same tool folder if it is included separately.
4. Make sure ADB is available and the Xiaomi phone is connected with ADB enabled.
5. Run the Xiaomi DIAG Tool.
6. Wait for the tool to detect the connected Xiaomi phone.
7. Check the displayed model and Android information.
8. Click ENABLE DIAG to start the process.
9. If the diagnostic package is already installed, the tool continues automatically.
10. If automatic installation is not possible, follow the on-screen instruction and install the APK from Internal Storage > Download.
11. Click CONTINUE after the manual installation is completed.
12. The tool will check the installation, start DIAG mode and wait for the Windows DIAG driver.
13. When the driver is detected, the tool shows the DIAG process as successful.

 Important Note:

All tools, files, and guides shared on this website are only for educational and testing purposes. Always scan files before use and use everything at your own risk.

By downloading any software or following any guide from this website, you automatically agree and accept this policy.

Download Link:-👇

Download

Download Link Download Link 2